Concrete Testing · KERBSTONE report sheet
Cube Compressive Strength
Density, calibrated load and cube strength computed exactly as laid out on the KERBSTONE sheet in New/Cubes Strength.xls — with an adjustable number of cubes in each set (defaults: 3 at 7 days, 6 at 28 days).
1. Test information
Ratio of concrete per 1 m³ (kg)
2. Cube results
Use + Add cube / − Remove in each age row (or × on a single cube) to change the number of cubes — 1 to 24 per set. Density = mass ÷ cube volume × 1000; corrected load = load × calibration coefficient; strength = corrected load ÷ cube factor (22.5 for a 150 mm cube).
| Cube marking | Mass of cubes (g) | Density made (g/cm³) | Cube volume (cm³) | Load (kN) | Calibration coefficient | Correct load (kN) | Date made | Date tested | Age of cube (days) | Cube strength (MPa) | Type of failure |
|---|
7 days — AV strength
—MPa
7 days — AV density
—g/cm³
28 days — AV strength
—MPa
28 days — AV density
—g/cm³
Engineering note: This calculator reproduces the arithmetic and layout of the KERBSTONE cube sheet only. Confirm cube size, calibration, curing, test procedure, acceptance class and reporting requirements against the project specification.